Blessing From God/Allah/Yahweh.

Blessing From God/Allah/Yahweh. The following is what you need to advance, and to bring Heaven to Earth after these EndTimes. From God/Allah/Yahweh to the People of Earth via Michael, the great prince. Use it wisely.

I call this new technology the photon coil. The theory behind it is:

Light or other electromagnetic radiation can be inserted into a continuous loop of reflective tubing (fiber optic glass rods are one example) causing it to become trapped. This allows it to become concentrated and useable.

fig 1

I believe if used in a coil-like fashion this will produce a field whether this is a magnetic, electrical, or as yet unknown field such as antigravity, is yet to be determined.

fig 2

I believe if used in a loop fashion this will produce highly concentrated pulses that may be used in applications similar to those of lasers.

Fig 3

The photon coil in Fig 3 is a simple application and consists of four parts.

1. A light or electromagnetic radiation source. This can be as simple as a light bulb or a penlight laser or as complicated as microwave or cosmic ray generators.

2. A coupler that allows the light to enter the photon coil but not to escape it. This can be made of many different materials such as the glass used in the making of fiber optic cables, polished aluminum tubing, or new age plastics or metals.

3. An ejector that allows the controlled ejection of the concentrated light. This can be as simple as modifying a coupler with a rotating mirror or as complicated as using special refraction technologies.

4. A length of material for the coil or loop. This will probably be the same material as the coupler. The length is dependent on the application and the limitations of the material. The following should be evidence enough as to the reasons I have not attempted to build this. The formula to figure out the concentration factor per second is as follows:

SPEED OF LIGHT IN FEET divided by LENGTH OF COIL IN FEET

The time in seconds the light is applied multiplied by the answer in the above equation provides the concentration factor. The concentration factor multiplied by the lumens or rate of photons produced by the light source will give you the number of photons being ejected given all the photons in the coil are allowed to be ejected. (note: a long coil with a mirror rotating very fast would not allow all the photons to escape, therefore causing the next pulse to be more concentrated than the first. Caution must be used or the photons could become great enough to go beyond the capacity of the material.) Here are some of the concentration factors at various lengths using 186,000 miles per second as the speed of light.

982,080,000 feet per second divided by 1 foot equals a concentration of 982,080,000 times per second of time applied.

982,080,000 feet per second divided by 10 feet equals a concentration of 98,208,000 times per second of time applied.

982,080,000 feet per second divided by 100 feet equals a concentration of 9,820,800 times per second of time applied.

I hope you can now see why I am reluctant to attempt building and testing this technology. Here is an example, the light source is a light bulb that puts out 1,000,000 photons per second, and the length of the coil is 100 feet. The time applied is 10 seconds. The 1,000,000 photons per second multiplied by the 10 seconds applied equals 10,000,000 photons. As seen above the concentration is 9,820,800 times. The original light had a distance of 98 feet between the photons and now has a small fraction of an inch. 10,000,000 photons now share a pulse the length of 100 feet and their concentration is 98,208,000 times the original light. Those of you with any science background will note that the light source in the example is weaker than any star seen in the sky with the naked eye. This example was given to show one possibility of this new technology. The seeing farther than we ever have before.

I have now shown you the basics of this new technology and I hope I have done so in terms the common layman can comprehend. The following applications are only possible if our concept of photons is true. We have all learned in physics that photons act as a wave in some applications and as a particle in other applications, but what is a photon?

Fig 4

In Fig 4 you see a photon traveling through space as a particle having spin giving it electric and magnetic fields. I know this diagram will have many in an uproar but it is an accurate depiction of a particle of light.

The reason I have shown a photon as such is so you can understand the applications I am about to disclose to you. As you know infrared light has a lower frequency and ultraviolet has a higher frequency. Light with a higher frequency has a shorter wavelength than that of lower frequency. The length and width of the coil may be adjusted to accommodate and fine tune to desired wavelength or frequency.

The application in fig 5 is a possible means of using light to create electricity. As you can see, this device would work similar to an electrical transformer. Photons are injected into the photon coil at C, and upon reaching point D are directed back to the beginning of the coil at point E. An electrically conductive coil is placed between the loops of the photon coil and due to inductance an electric current is produced across points A and B.

It is envisioned that the frequency of the injected photons would also be reproduced on the conductive coil allowing electrical devices such as computers, radio, radar, etc. to operate at these higher frequencies.

In the following diagram you see twin coils with photon flows in opposite directions. Photons are injected at points A and B. The coils will fill with photons and produce magnetic fields that will cancel each other, which may cancel the affects of gravity on the object. This can not be tested with ordinary electromagnetic coils because they are too heavy and the concentration of electrons is limited. You will also notice points G and H. These are rotating mirrors fully reflective on one side and transparent on the other side. They allow the transfer of photons from one coil to the other, thereby allowing rapid changes in the fields. When a rapid change is made in the field, I envision the ability to attract or repel the object from another object such as Earth which also possesses a magnetic field. At points I to J and points K to L I am showing the avenues of transfer between the coils. At points C to E and points D to F I am showing the returns that complete the coils making them continuous loops. Please note that if this application is attempted I advise the device being placed inside a vacuum. It is possible that fusion may occur if any matter is in the center of this device. This is the heart of my envisioned starship. Please use it for the good of humanity.

Fig 6 Heart of a starship

God/Allah/Yahweh Brings Knowledge And Enlightenment At The Proper Times. Thanks And Praise To God/Allah/Yahweh.